华为eNSP，PC1，PC2，一个路由器，如何配置静态IPv4地址，实现PC1和PC2互通

这是配置

Dec 10 2014 15:35:20-05:13 Huawei %%01IFPDT/4/IF_STATE(l)[0]:Interface GigabitEth

ernet0/0/0 has turned into UP state.

Dec 10 2014 15:35:20-05:13 Huawei %%01IFPDT/4/IF_STATE(l)[1]:Interface GigabitEth

ernet0/0/1 has turned into UP state.

sys

Enter system view, return user view with Ctrl+Z.

[Huawei]int g0/0/0

[Huawei-GigabitEthernet0/0/0]ip a

[Huawei-GigabitEthernet0/0/0]ip address 192.168.2.1 24

[Huawei-GigabitEthernet0/0/0]

Dec 10 2014 15:37:33-05:13 Huawei %%01IFNET/4/LINK_STATE(l)[2]:The line protocol 

IP on the interface GigabitEthernet0/0/0 has entered the UP state. 

[Huawei-GigabitEthernet0/0/0]q

[Huawei]int g0/0/1

[Huawei-GigabitEthernet0/0/1]ip ad

[Huawei-GigabitEthernet0/0/1]ip address 192.168.3.1 24

[Huawei-GigabitEthernet0/0/1]

Dec 10 2014 15:38:03-05:13 Huawei %%01IFNET/4/LINK_STATE(l)[3]:The line protocol 

IP on the interface GigabitEthernet0/0/1 has entered the UP state. 

[Huawei-GigabitEthernet0/0/1]q

这是图