1.Error Code 001: Communication Failure - This could be due to a problem in the network communication between the motor controller and the other components of the servo control system, causing a disruption in signal transmission.
2.Error Code 002: Overcurrent Protection - This error indicates that the power supplied to the servo motor is higher than the recommended limit, causing the motor to draw excess current and damage its components or the controller.
3.Error Code 003: Encoder Fault - This error typically suggests an issue with the motor encoder, which may be caused by an optical or electrical fault. A faulty encoder may result in unstable motor operation or incorrect position feedback to the controller.
4.Error Code 004: Motor Fault - This error implies a defect in the motor or its wiring that causes an abnormal or inconsistent function. This code requires immediate attention as any malfunction in the servo motor may cause harm to the machinery or personnel nearby.
5.Error Code 005: Temperature Warning - This error indicates that the motor or other components within the system are overheating and may require cooling down before continuing operation to prevent damage.
6.Error Code 006: System Error - This error is generally caused by an internal error within the servo control system and may indicate a software issue or hardware malfunction that requires troubleshooting by expert technicians.
7.Error Code 007: Gantry Misalignment - This error indicates that one or more axes have become misaligned, resulting in misalignment of the gantry structure. This can cause problems such as mispositioning of the workpiece and overall reduction in accuracy.
8.Error Code 008: Servo Controller Failure - This error suggests a failure in the servo controller itself which could result in the loss of real-time positioning feedback, and cause incorrect positioning, stability issues, or even complete system failure.
9.Error Code 009: Power Supply Failure - This error may occur due to low voltage or voltage drops, poor quality power supply, or issues with the power supply unit. Insufficient power supply can cause poor performance and lead to system damage.
10.Error Code 010: Encoder Signal Interference - This error indicates that the encoder signal is being disrupted by external factors such as electromagnetic interference or radio frequency interference. This may result in incorrect feedback signals to the control system, leading to improper motor operation or imprecise positioning.
